Turtle Beach Montego A3DXstream, Руководство пользователя

Страница: 14 / 52

14 T
URTLE
B
EACH
S
YSTEMS
I
NSTALLING THE
CD-ROM A
UDIO
C
ABLE
The Montego comes with an audio connector cable — one end is keyed
(MPC-2), the other is not (Sony). All CD-ROM drives that adhere to the
MPC-2 (Multimedia PC) standard have an MPC-2 jack.
Connect the MPC-2 connector to your CD-ROM drive. Then attach the
Sony connector to the Montego.
When connecting the CD-ROM audio cable, note that:
The audio cable should be plugged into the CD-ROM drive first; then
the other end of the interface should be plugged into the appropriate
connector on the Montego sound card. Make sure that you are
plugging the audio connector into the 4-pin header labeled “CD IN.”
On the cable, “white” is “left” and “red” is “right.”
When connecting the cable to the Montego, the red wire should be on
the right (white should be closest to the slot cover.)
Now You Are Ready to Install the Drivers!
P
ROCEED TO THE CHAPTER THAT APPLIES TO YOUR SYSTEM
:
Windows 95 Installation
Windows 3.x Installation
Windows NT 4.0 Installation
Sony Connector
Left
Ground
Ground
Right
MPC-2 Connector
(keyed)
Left
Ground
Ground
Right