Turtle Beach Ear Force XP400, Руководство пользователя

Страница: 4 / 19

3 4
XP400 Headset - Left View
Power Button:
Turn on the headset by pressing the
power button for a couple of seconds, then release.
You will hear 2 beeps and the power LED should start
flashing. Turn off the headset by pressing the button
until the LED stays on and you hear 2 beeps, then
release. To enter Pairing Mode, press and hold the
power button for about 6 seconds until you hear 2 fast
beeps and the LED begins to flash rapidly (see pg 6).
The headset will turn off after several minutes if there’s
no audio detected or if the transmitter is turned off.
Tone Button: Press this button to activate the different
EQ presets. A beep will indicate which preset is
selected. (see pg. 18)
Blast Limiter Button:
Press this button to activate the
different Blast Limiter presets. A beep will indicate
which preset is selected. (see pg. 18)
Variable Mic Monitor: Adjusts the level of your voice
heard in the headset. (see pg. 19)
NOTE: Turning up the mic monitor may cause the mic to pick
up room sounds which will make the silence detector not
automatically shut off the headset when it’s not being used. If
the power is not automatically shutting down, turn down this
mic monitor control.
Xbox 360 Controller Jack: Used for optional wired chat
setup (see pg. 9)
Game Volume: Turn to adjust the game sound level.
Removable Microphone with Adjustable Boom:
The microphone can be removed from the headset
when chat is not required by detaching it from the boom.
To properly position the mic: Remove the foam cover, insert the
boom into the socket so the holes on the mic casing are facing
your mouth. Then replace the foam cover. The boom jack also
has a marker to indicate the proper mic position.
XP400 Headset - Right View
1
2
3
4
5
1
2
3
4
Bluetooth ® Volume: Press Chat (+) or Chat (–) to adjust
Bluetooth volume level. A tone will sound each time the
volume level changes.
Bluetooth LED: Flashes blue once per second when paired
with a device. Flashes blue twice per second when not
paired with a device. Flashes blue and red quickly when in
pairing mode.
Bluetooth Multi-Function Button (BT MFB):
Powers on the Bluetooth and performs several other
functions described in the “ Bluetooth ” section. (see pg. 15)
NOTE: The Bluetooth feature is normally powered on. If it is not
paired to another device, it will automatically turn off after 5
minutes to conserve battery power.
Mic Mute Button
: Press to toggle between muting and
unmuting the microphone. A high beep will sound when the
mic is unmuted and a low beep will sound when the mic
is muted. When using the XBA Bluetooth Adapter, the mic
can also be muted by double-pressing the button on the
puck. When using the optional Talkback cable, the mic can
be muted directly from the switch on the Talkback cable.
Headset Charging Port: The headset may be charged by
connecting this Mini USB input to a free USB port on your
gaming console using the included Headset Charging
Cable. (see pg. 17)
NOTE: The Headset Charging Cable included with the XP400
can only be used to charge the headset and cannot be used as a
standard USB data cable.
Charging LED: Turns red when charging and turns off
when charged.
6
7
1
2
3
4
5
6
7
1
2
3
4
5
5
6
6