Turtle Beach Ear Force XP400, Руководство пользователя

Страница: 10 / 19

15 16
The XP400 incorporates Dual Pairing Bluetooth technology that can be simultaneously paired to 2 Bluetooth enabled devices at once.
This lets you communicate with Xbox LIVE
™
and PSN
™
chat and answer calls on a Bluetooth enabled mobile phone. If you’re not using
either of these Bluetooth features, you should turn off the Bluetooth to conserve battery power. The XP400 will automatically remember
the last 2 paired devices upon powering on.
Pairing the Bluetooth for Xbox LIVE or PSN Chat
See "Xbox 360 Wireless Chat Setup" on page 10.
See "PS3
Chat Setup" on page 14.
Pairing a Bluetooth Enabled Mobile Phone
The XP400 Bluetooth must be powered off before you start:
1. On the XP400, press and hold the Bluetooth Button (BT MFB) for 5 seconds until the flashing LED changes from blue to
red—then release the button.
2. On your Bluetooth enabled mobile phone, activate the Bluetooth mode and search for Bluetooth devices as described in its user
manual.
3. When your device is finished scanning, select “TURTLE BEACH BLUETOOTH CHAT” from the list and follow the prompts to connect.
4. Enter “0000” as the Pass Key and select “OK” . The Bluetooth LED on the headset will start flashing blue about once per second,
indicating that the headset and phone are paired.
*
NOTE: Only one Bluetooth device can be active on the headset at a time. For example, if you are making a call with the headset while on Xbox LIVE
chat, the chat will be deactivated until the call is over.
Mobile Phone
via
Bluetooth *
Making Calls
Once the headset is successfully paired with your mobile phone, you can use it to make and receive calls. It can be used with voice
dialing if your phone supports this function.
1.
Using voice dialing* – Press and hold the BT MFB button for 3 seconds until you hear a tone—then release. The voice recognition
prompt in your phone will now be activated. Say the name of the phone number or person whom you want to call. You can exit the
voice recognition state at any time by pressing the MFB for 3 seconds.
2.
Using mobile phone keys to make a call –
Dial the number on the mobile phone as normal. Once the call has been placed, the sound
will automatically be transmitted to the headset.
3.
Redial – Double-click BT MFB button.
You will hear two tones, and the last number called will be dialed.
4. Muting the microphone – During a call, the microphone muting can be toggled by Pressing the MUTE button . You will hear one tone,
indicating that the mic mute is active. While the mic is muted, a beep will be heard every 30 seconds to let you know that mic mute is
still activated.
NOTE: Some mobile phones may not have a redial or voice recognition function. If a phone does not have a redial function, then a double-click of the
MFB will initiate the voice recognition state instead. If a phone does not have either function, then a double-click or 3-second press of the MFB will
have no effect.
Receiving Calls
When the XP400 Bluetooth is powered on and there is an incoming call you will hear a phone ring chime in the headset.
You have three options when an incoming call is received:
1.
Answer call – Press the BT MFB once to accept the call. Press it again to end a call. A tone is heard in the earpiece each time you
answer or end a call.
2. Reject call – Press and hold the BT MFB for 3 seconds until you hear a beep. The call is sent directly to your voicemail.
3. Do nothing – The “incoming call chime” will sound until your phone sends the caller to voicemail.
Using Bluetooth
®