15
16
Technical Specifications
DXL1 Headset
• 50mm diameter speakers
• Speaker Frequency Response: 20Hz - 20kHz, >120dB SPL @ 1kHz
• Condenser Microphone Frequency Response: 50Hz - 15kHz
• Cable length: 16 ft.
DXL1 Amplifier
• Stereo DC-coupled, 35mW/ch, THD <1%, Frequency Response: DC - 30kHz
• Fixed Bass Boost +9dB @150Hz• Mic mute switch
• Maximum analog input level with volume control on maximum setting: 2Vpp (700mV rms)
• 3.5mm plug for line input
• 2.5mm Xbox 360 talkback cable jack
• USB connector for power (5VDC @ <60 @ mA max)
DSS2 Surround Sound Processor
• Game audio frequency response: 20Hz - 20kHz, >120dB SPL @ 1kHz
• Headphone amplifier: Stereo 35mW/ch, THD <1%
• Digital Audio Input: TOSLINK connector compatible with 48kHz Digital Audio Streams
• Maximum Analog Input: 2Vpp (700mV rms)
• USB connector for power (5VDC @ <380 @ mA max)
Troubleshooting
Xbox 360 Does Not Have Digital Output
Older Xbox 360 models don’t include an digital optical output. If this is the case with your Xbox 360, then you will have to purchase a cable that
includes a digital output jack on the connector. Here are the Xbox 360 cables that support digital output:
• Component A/V cable
• VGA A/V cable
• S-Video A/V cable
• Advanced SCART A/V cable
• HDMI audio adapter cable
• Composite A/V cable with digital output
If you are using HDMI and your Xbox A/V cable does not have a digital output, then you can alternatively connect the DSS2 digital optical cable
to a digital audio output on your HDTV (if your HDTV has a digital optical output).
No Audio When Using a BluRay Player
Ensure the audio settings in the BluRay player are configured to play Dolby Digital. The DSS2 is not DTS compatible. If the DSS2 is connected to
a digital source with a DTS signal, then the DSS2 will not receive audio.
No Sound When Using a Digital Connection
Ensure the digital cable is connected properly and receiving a signal. When connected to a console that is powered on, carefully check to see if
a red light is being emitted from the end of the digital optical cable. Also be sure that the protective covers have been removed from the ends of
the digital optical cable.
Analog Input isn’t Working
The DSS2 analog input will automatically shut off whenever the digital input is active. To hear the analog input signal, either
disconnect the optical cable from the digital input on the DSS2, shut off the device connected to the optical cable (e.g. Xbox 360) to disable the
digital audio signal, or connect to the auxiliary input.
GAME
CHAT
ON
M
IC
M
UTE
GAM
E
CHAT
ON
M
IC
M
UTE
GA
M
E
CH
AT
ON
M
IC
M
UT
E
GA
M
E
CH
AT
ON
M
IC
M
UT
E
GA
M
E
CH
AT
ON
M
IC
M
UT
E
GA
M
E
CH
AT
ON
M
IC
M
UT
E
GAME
CHAT
ON
M
IC
M
UTE
GAME
CHAT
ON
M
IC
M
UTE
