User Manual
a)
You can
reduce false metal detection alarms caused by
small metal objects
such as rings, keys, belt
buckle,
shoes, and so on by following the steps
given below:
Choose a small piece of metal as a sample (Ex. small screw
driver). Increase the sensitivity
on the metal detector
so that when
the testing person carries the sample through the
metal
detector, it
triggers
the alarm
and correctly lights up the red LED in the
corresponding metal detection panel.
Decrease the sensitivity a little,
have the testing person
carry the
SAME
metal
sample and walk through
the detector again. If the
alarm continues to sound, once again, reduce the sensitivity until
the metal detector's alarms stop triggering when the metal sample
is passed through.
Note:
You can adjust the sensitivity for each metal detection zone.
. After
implementing the above
adjustments, the metal
objects
smaller than the
sample will not trigger the alarm. Still
however
,
metal objects larger than the
sample
will
be detected and
will
trigger
the alarm
, accordingly
.
2.
b
)
www.TURNSTILES.us | [email protected] | 303-670-1099
18
