5 |
P a g e
1.
Plug a flash drive into the USB port of your computer
2.
On your computer click the link to the APK
3.
Your browser will open to we-transfer as the file is too big to send over
– just click download and it will prompt you to pick where you are
going to save
it. Select the flash drive.
4.
Once the download is complete plug the flash drive into one of the open
USB
ports of the kiosk
5.
On the kiosk open the file explorer (yellow button)
6.
Select USB
→
select the USB you have
inserted → select the APK file that
was
downloaded
7.
Read through the instructions on the window that pops up and hit next then
hit install
8.
The kiosk will now prompt you to open the new app!
and you can now feed the power and ethernet (optional) cables through the
bottom and up the back of the kiosk. Connect the end of the power supply to the
split power cable barrel connector which will power both the kiosk and the
printer. The ethernet cable will plug into the back of the monitor of the kiosk next
to where the power goes in.
Power & Cable Management
Again, in order to minimize any tripping hazards, it is best to have the kiosk near
the power outlets otherwise be sure to secure all cables to the ground.
Software Installation
There are several different versions of the software that you may run on the
software so you may receive a link with the APK for you to download. There are
two option of downloading your new app. One will use the USB port in the back
of the Kiosk the other can be downloaded through the browser
(you will need an
Internet
connection via
Ethernet
).
Installation using the USB Port
Содержание FK1013+
Страница 1: ...1 P a g e FK1013 Manual Installation Guide...