4 |
P a g e
Installing the is a breeze. Once assembled (as directed below), just
make sure the kiosk has access to power and Ethernet (optional). The kiosk
has visible lights at the top of the screen to make capturing the face easier
but still, it is not suggested to use it in a completely dark room. The base of
the kiosk is heavy enough to keep the unit grounded, so no need to bolt it to
the ground, which means you will have the freedom of being able to move the
kiosk to the ideal location.
The kiosk is versatile and a great resource to use for managing visitors- it can
be used anywhere in the office/ warehouse/ complex with just a few location
requirements.
1.
Kiosk needs to be in a temperature-controlled environment to get
accurate reads
2.
Kiosk should be in a well-lit area to get the fastest facial capture
3.
Kiosk should be as close as possible to a power outlet to minimize
tripping hazards otherwise the cables will need to be taped down
The assembly of the kiosk quick and easy so you can get to managing your
visitors before you know it. After you get the box opened get someone to help
you to carefully lay the kiosk flat on a table with the bottom hanging over the
edge. Next get the base out of the box as well as the bolts and tools from the
small box included in the package. Line the holes in the base up to the holes in
the bottom of the kiosk and fasten each of the bolts with the included Allen
wrench. Once they are tightly secured you can now carefully stand the kiosk
up on the ground. Next you will use the screwdriver to remove the
temperature detection unit off the top of the kiosk and use the key to remove
both back panels. You now have the interior wires exposed
Installing the Kiosk
Location
Assembly
Содержание FK1013+
Страница 1: ...1 P a g e FK1013 Manual Installation Guide...