18 ·
Number
of
cells
DEC
- +
At this screen, you can set up the current and voltage of the
battery pack. Charging and discharging will make the
batteries come to the voltage level of storage state.
Batt type
Stop
Elapsed
time
INC
Charge
or discharge
current
Supplied
capacity
DEC
Start
Enter
-
INC
+
Current
voltage
battery
Charging lithium battery in the storage mode
This is for charging or discharging Lithium battery not to be used for the time being. The
program will determine to charge or discharge the battery to the certain voltage
depending on the voltage of the battery at its initial stage. They are different from the type
of the battery, 3.75V for LiIo, 3.85V for LiPo and 3.3V for LiFe per cell. If the voltage of
battery at its initial stage is over the voltage level to storage, the program will start to
discharge.
Number
of
cells
DEC
-
Batt type
Stop
elapsed
time
INC
+
Battery
voltage
DEC
Start
Enter
-
INC
+
Discharged
capacity
The value of discharge current on the left can not exceed 1C,
and the value on the right can not be under the voltage
recommended by the manufacturer to avoid deep discharging.
Press
Start/Enter
for more than 3 seconds to start
discharging.
discharge
current
Discharging of lithium battery
This screen shows the real-time status charging. Press
Batt
Type/Stop
key once to stop the charge process.
This shows the real-time status of discharging, you can press
Batt Type/Stop
key to stop discharging.
'> 3 seconds
'
'> 3 seconds
'
CHARGING LITHIUM BATTERY IN THE STORAGE MODE
