Turner Designs Little Dipper 2, Руководство пользователя

Страница: 5 / 24

998-2821 Rev. D Page 5
2. Installation and Operation
2.1 Installation
Turner Designs’ Little Dipper

2 is rated for light industrial environments.
Do not install the Little Dipper

2:

In direct sunlight or near heat sources - operating temperature 0-50 °C.

On vibrating walls or surfaces that affect the flow.

Near devices that produce a strong electromagnetic field, such as large
generators.
It is recommended that the Little Dipper

2 be installed in such a way that the flow is
directed upward to expel any trapped air bubbles or air trapped on the optical
window will influence signal and cause erratic readings - see Section 4.0.
2.2 Tee Installation
We recommend the following installation procedure for installing the Little Dipper

2
onto the mounting tee provided for flow through applications:
1)
2) Connect the mounting tee in line with your flow and start flowing water.
3) Inspect for leaks.
Note: In the event the Little Dipper

2 must be removed for service,
the mounting tee opening can be plugged with Plumbing Plug P/N 2820-
520. Contact
Accessory Sales to purchase.
Make sure that the o-ring
is installed in the tee.
Insert the Little Dipper 2
into the tee. Make sure to
align the slot on the tee with
the tab on the Little Dipper 2.
Lower the ring over the
top of the Little Dipper 2
and hand tighten.
DO NOT USE TOOL TO TIGHTEN .
Plumbing Plug P/N 2820-520