Standard Slipper Assembly Page 12/23
Solder the wires to the components:
23. Solder the Motor Connectors to the Motors, The Left is
offset toward the back of the bot, the Right is offset
toward the front of the bot. There are details on the
next slide for soldering the
Red Wire
on the JST
Battery Connector to the far switch leg and the
Cut
portion of the Red Wire
from to the near switch leg.
23.
27
It is important to have as strong of a joint as possible between the
motor terminals and the motor connector wires. The failure of these
joints are among the most common causes of losing drive, which often
results in losing battles.
For soldering these critical joints, the best technique we have found is
to have well-tinned wires along the outside of well-tinned motor
terminals and touching the iron to the inner side of the terminals,
ensuring that the solder flows from the wires through the terminals.
Содержание SLIPPER
Страница 1: ...1 ...
