7
Turn of the Century
TM
Glass Bowl
Clip
ASSEMBLY INSTRUCTIONS
11
10
9
9. Remove the switch housing screws pre-assembled
to the light kit and save for the next step. Then, connect
the single-pin connectors from the fan to the single-pin
connectors from the light kit -- blue to black and white to
white.
10. Align the notch in the light kit with the reverse switch
on the switch housing. Then secure the light kit to the
switch housing using the three previously removed
switch housing screws.
11. Install the bulb into the socket of the light kit.
12
Switch Housing
Screw
Reverse Switch
Notch
Switch
Housing
Single-pin
Connector
Light Kit
Switch
Housing
Screw
Bulb
12. Lift the glass bowl into the light kit. Ensure each of
the three clips are inside of the edge of the glass bowl
and life the glass bowl until it is securely clipped into
place.
