Turn of the Century
TM
Downrod
Clip
Set Screw
Yoke
Downrod
Pin
5
ASSEMBLY INSTRUCTIONS
2
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Remove the canopy from the mounting bracket by
removing the two mounting bracket screws from the
round holes in the canopy and save for later use. Then
loosen the other two mounting bracket screws from
the L-shaped slots. Install the mounting bracket to the
outlet box (not included) using the screws and washers
provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
4
3.
CLOSEMOUNT INSTALLATION
(OPTIONAL)
a. Remove the canopy cover from the bottom of the
canopy.
b. Remove the three Phillips-head closemount screws from
the top of the motor housing.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor. The larger holes in the
canopy will encompass the three pre-installed screws.
d. Secure the canopy to the top of the motor with the
closemount screws that were previously removed.
e. Hang the fan on the hook of the mounting bracket to
free hands during wiring process.
Proceed to Step 8.
Closemount
Screw
Canopy
Mounting
Bracket
Mounting
Bracket Screw
3
4.
DOWNROD MOUNT
- Remove the downrod pin and
downrod clip from the downrod. Then, loosen but don’t
remove the set screws in the yoke.
