TURFCO TurnAer-26 Скачать руководство пользователя страница 8

Страница: 8 / 17

™

INTENDED USE AND FUNCTION

The TurnAer-26 is a self-propelled, steerable, coring

tine aerator. The TurnAer-26 is intended to be used for

the aeration of the turf or soil at a properly prepared

worksite. The TurnAer-26 is NOT intended to be used

for any purpose other than the aeration of turf. The

TurnAer-26 is NOT designed for or intended to accept

riders.

DESCRIPTION OF ENGINE AND OPERATOR

CONTROLS (See Figure 4)

The operator controls are located on the handlebar.

They consist of the engine throttle, the clutch handle,

the steering brake controls, and the transport wheels

lift handle. Ensure that all operator controls are in good

operating condition. Do not alter operator controls

and/or operate the TurnAer-26 with defective or non-

operational operator controls.

Description

FIGURE 4

HANDLEBAR

CLUTCH

HANDLE

ENGINE

CONTROLS

TRANSPORT

WHEELS

TINES AND TINE REELS

ENGINE

THROTTLE

TRANSPORT

WHEELS LIFT

HANDLE

RIGHT AND LEFT TURN

STEERING BRAKE

CONTROL LEVERS

LOCATION

OF OPERATOR

CONTROLS AND

COMPONENTS

OPERATORS

POSITION

CLUTCH

HANDLE

HANDLEBAR

LOCKING NUTS

DS85370-01

DESCRIPTION

Содержание TurnAer-26


















Результаты поиска

Содержание TurnAer-26

Отзывы:

Похожие инструкции для TurnAer-26

Бренды по названию

Популярные бренды

TURFCO TurnAer-26, Руководство оператора, Руководство по техническому обслуживанию, Список запасных частей

Результаты поиска

Содержание TurnAer-26

Отзывы:

Похожие инструкции для TurnAer-26

Бренды по названию

Популярные бренды