TURFCO T3000i 85874 Скачать руководство пользователя

Страница: 7 / 20

85874 & 85875 Rev B

TURFCO T3000i SERIES APPLICATOR

Description

The Turfco T3000i Applicator is an easy to operate,

comfortable, high production lawn applicator for dry

and spray products. The lawn applicator is capable

of spreading fertilizer or spraying at the rate of 4000

square feet per minute (371 square meters per

minute). The T3000i Applicator is a 4 wheel machine

using standard automotive style steering for directional

control and operator comfort. The front wheels are

the steering wheels and the rear wheels are the drive

wheels.

DS85874-01RevA

SPREADER

HOPPER

SPRAY

NOZZLES

OPERATOR

CONTROLS

OPERATOR

POSITION AND

PLATFORM

FIGURE 1

Welcome

Welcome to the Turfco T3000i Series Applicator. This manual will describe the machine, give correct

operating procedures, and help you learn and understand correct operation. Operation of this

machine without training can result in injury to the operator or damage to the machine.

The operators position is standing on a vibration

isolated platform on the rear of the machine. The

forward and reverse speeds are controlled by using a

simple directional hand control allowing the operator

total control of the speeds from 0 to 5 MPH (0 to 8.04

Km/h). Braking is provided by a dynamic braking

system within the hydrostatic transmission and a hand

operated parking brake. Releasing the speed control

(and the foot operated forward speed control pedal)

will stop the machine. The machine is designed so

that it will stop movement if the operator dismounts

and releases the speed control.

DESCRIPTION

The Turfco T3000i™ Applicator is a self-powered ride-on spreader/sprayer. The T3000i is intended

to be used for the application of properly prepared turf care liquid spray products and turf care granular

products. The T3000i is NOT intended to be used for any purpose other than the application of properly

prepared turf care products to the turf. Operation is intended to be at properly prepared worksites only.

Intended Use

Product Number 85874 - T3000i Series Applicator

Product Number 85875 - T3000i Series Applicator with Factory Installed Electric Start Kit

Содержание T3000i 85874





















Результаты поиска

Содержание T3000i 85874

Отзывы:

Похожие инструкции для T3000i 85874

Бренды по названию

Популярные бренды

TURFCO T3000i 85874, Руководство оператора

Результаты поиска

Содержание T3000i 85874

Отзывы:

Похожие инструкции для T3000i 85874

Бренды по названию

Популярные бренды