3
85372
™
Specifications
Intended Use:
The TurnAer 6 is a self-propelled, steerable, coring tine aerator. The TurnAer 6 is
intended to be used for the aeration of the turf or soil at a properly prepared worksite. The TurnAer 6
is NOT intended to be used for any purpose other than the aeration of turf. The TurnAer 6 is only intended to
accept riders when properly equipped with an optional TurnAer Chariot (Product #86168).
Aerating Speed
..........Up to 110 Meters Per Minute (359 Feet Per Minute) (21,557 Feet Per Hour)
at 6.6 Km/h (4.1 MPH)
Aerating Rate
.............Up to 4068 sq. meters Per Hour (4865 sq. yd.) (43,787 Sq. Ft. Per Hour)
Aerating Depth
...........Up to 70 mm (2-3/4” Inches)
Aerating Width
...........0.619 Meter (24-3/8” Inches)
TurnAer 6 Width
.........0.897 Meter (35-5/16” Inches)
TurnAer 6 Length
.......0.99 Meter (39” Inches) Handlebars In Folded Storage Position
1.473 Meter (58” Inches) Handlebars In Operating Position, Wheels Down
TurnAer 6 Height
........0.914 Meter (36” Inches) With Handlebars Folded In Storage Position
1.295 Meter (51” Inches) With Handlebar In Operating Position (Middle
Height Setting), Rear Transport Wheels Lowered (Wheels Latched Down)
0.99 Meter (39” Inches) With Handlebar In Operating Position (Middle
Handlebar Height Setting), Rear Transport Wheels Raised (Wheels Latched Up)
Weight
........................163 Kg (359 Pounds)
Engine
.........................Product Number 85372 - Honda 2.98 kW (4.0 HP) GX120 With 6:1 Gear Reducer
Drive
............................V-Belt to Differential, RC-40 Roller Chain to Tines Reels and Front Tires
Clutch
.........................Belt Idler Type, Controlled From Operating Position
Tines
...........................Coring Type, 19 mm Diameter (3/4” Inch) Heat Treated Alloy Steel
V-Belt
..........................Goodyear B48F 85510
Chain
...........................RC-40 Roller Chain
Bearings
.....................Flange Mounted Self-Aligning Sealed Ball Bearings
Rear Transport Wheels
....... 8” x 2.5” Inch Semi-Pneumatic Rib Tread With 5/8” Roller Bearings
Registered Trademarks and Patents
TurnAer™ 6
is covered under U.S. Patent 6,708,773
Additional Patents Pending
TurnAer™ 6
is a trademark on Turfco Mfg., Inc.
TURFCO
®
is a registered trademark of Turfco Mfg., Inc.
TURFCO DIRECT
(SM)
is a registered service mark of Turfco Mfg., Inc.
Vibration Level:
Operator Position
on Handlebar =
0.41 m/s2 RMS
Operating Conditions:
Full Throttle, Operating
Noise Emission Level:
Operator Position
Sound Pressure (LpA) =
87.5 dBA
Sound Pressure Level (LwA) =
97 dBA
Operating Conditions:
Full Throttle, Stationary, Aerator Operating
WARNING
THE ENGINE EXHAUST FROM THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
ONLY OPERATE ENGINE IN AREAS WITH ADEQUATE VENTILATION.
DO NOT OPERATE ENGINE IN ENCLOSED AREAS.
SPECIFICATIONS
Vibration and Noise Emission Levels
