turck TBEN-L5-4RFID-8DXPOPC-UA, Инструкция по эксплуатации, Страница: 66 / 120

Setting
Setting RFID interface parameters via the web server
66
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Designation Meaning
HF: Address for ScanStart
method Start address of the UID or USER memory area on the tag to be
read
Default setting:
0
HF: Length for ScanStart
method Number of bytes to be read with the ScanStart method
Default setting: 8
HF bus mode: Activate
read/write head … Activates or deactivates the read/write head with address .....
Default setting:
Off
8.2.2 HF applications – selecting the tag type
„
If the ScanStart parameter is set to Read, a tag must be selected beforehand. Automatic
tag detection is not possible.
„ In multitag applications select a tag type for the execution of the read and write meth-
ods. Automatic tag detection is not supported for the read and write commands in mul-
titag mode.
The “RF communication error” is generated if the parameters of a tag located in the detection
range of the read/write head do not match the selected tag type. In this case check the set tag
type.
The tag type does not have to be selected in single tag applications and for the execution of in-
ventory commands or scan methods in multitag applications if the read/write head detects the
tags automatically.
Tag Firmware version
Read/write head
Selectable Automatic
detection
possible Displayed in web
server
1: NXP Icode SLIX ≥ Vx.91 x x x
≤ Vx.90 x x x
2: Fujitsu MB89R118 ≥ Vx.91 x x x
≤ Vx.90 x x x
3: TI Tag-it HF-I Plus ≥ Vx.91 x x x
≤ Vx.90 x x x
4: Infineon SRF55V02P ≥ Vx.91 x x x
≤ Vx.90 x x x
5: NXP Icode SLIX-S ≥ Vx.91 x x x
≤ Vx.90 x – x
6: Fujitsu MB89R119 ≥ Vx.91 x x x
≤ Vx.90 x – x
7: TI Tag-it HF-I ≥ Vx.91 x x x
≤ Vx.90 x – x
8: Infineon SRF55V10P ≥ Vx.91 x x x
≤ Vx.90 x – x
11: NXP Icode SLIX-L ≥ Vx.91 x x x
≤ Vx.90 x – x
12: Fujitsu MB89R112 ≥ Vx.91 x x x
≤ Vx.90 x – x
13: EM4233SLIC ≥ Vx.91 x x x
≤ Vx.90 x – x