2 B1406
www.turck.com • Phone: 763-553-7300 • Application Support: 1-800-544-7769 • Fax: 763-553-0708 • Turck Minneapolis, MN 55441
Contents
Chapter 1: LTX R10 SSI Overview............................................................................................................................ 3
Chapter 2: Installing ................................................................................................................................................ 6
2.1 Installing to a Mounting Bracket ......................................................................................................................................................... 6
2.2 Installing in a Hydraulic Cylinder ......................................................................................................................................................... 7
Chapter 3: Wiring .................................................................................................................................................. 10
3.1 Wiring Connections ................................................................................................................................................................................10
3.2 Features.......................................................................................................................................................................................................13
3.3 Troubleshooting ......................................................................................................................................................................................14
3.4 Specifications ............................................................................................................................................................................................15
3.5 Part Number Key......................................................................................................................................................................................16
NOTE:
Turck has checked the accuracy of this manual at the time it was approved for printing. This manual may not provide
all possible ways of installing and maintaining the EZ-track. Any errors or additional possibilities to the installation and
maintenance of the EZ-track will be added in subsequent editions. Comments for the improvement of this
manual are welcome.
Turck reserves the right to revise and redistribute the entire contents or selected pages of this manual. All rights to the
contents of this manual are reserved by Turck.
Unpacking
Carefully remove the contents of the shipping carton and check each item on the packing slip before destroying the packing
materials. Any damage must be reported to the shipping company. If you do not receive all of the parts, contact Turck at
800-544-7769.
Most probes are shipped in a tube. To remove the metal end cap, use a large, flat blade screw driver or a metal rod and tap on
the inner edge of the cap until it pivots. Grab the cap and pull it out. Use caution as the edge of the metal cap may be sharp.
If it is necessary to ship the probe after you have removed it from it's original packaging, it is recommended that you reuse the
tube that it was shipped in or repackage the EZ-track in such a way that it cannot be damaged in transit.
