turck BIL-L4-16DXP-AUX, Инструкция по эксплуатации

Страница: 20 / 35

Setting
Parameters
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2022/09 | 20
Pulse stretching input — 0×43 (67)
This parameter defines the duration of the pulse stretching for digital input edges in multiples
of 10 ms. This allows that even short signals with longer PLC cycle times can be detected.
Format Length
Array of byte 16 byte 1 byte per channel
Default values are shown in bold .
Value Meaning
0 Disabled Pulse stretching deactivated
1 1…255 Pulse stretching (in steps of 10 ms)
Bit offset Bit offset
0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
Sub index Sub index
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C7P2
(B) C7P4
(A) C6P2
(B) C6P4
(A) C5P2
(B) C5P4
(A) C4P2
(B) C4P4
(A) C3P2
(B) C3P4
(A) C2P2
(B) C2P4
(A) C1P2
(B) C1P4
(A) C0P2
(B) C0P4
(A)
NOTE
This parameter can also be set for all connectors of the module via the IODD.
Manual output reset after overcurrent — 0x44 (68), sub index 0
This parameter defines if a manual reset is necessary after an overcurrent occurred at the digital
channel.
Format Length
Byte 2 byte 1 bit per channel
Default values are shown in bold .
Value Meaning
0 No
Automatic recovery mode
1 Yes Controlled recovery mode (output has to be reset manually)
NOTE
This parameter can also be set for all connectors of the module via the IODD.
Byte 0 Byte 1
Bit offset Bit offset
7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8
Sub index Sub index
9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8
C7P2
(B) C7P4
(A) C6P2
(B) C6P4
(A) C5P2
(B) C5P4
(A) C4P2
(B) C4P4
(A) C3P2
(B) C3P4
(A) C2P2
(B) C2P4
(A) C1P2
(B) C1P4
(A) C0P2
(B) C0P4
(A)