Turbosound TCS110B, Быстрый старт

Страница: 8 / 12

14 TCS Passive series Quick Start Guide 15
TCS Series Flying Components
Wall and Ceiling Brackets
To install a loudspeaker using Turbosound wall and ceiling brackets, fi rst separate the brackets into their
wall/ceiling plate and speaker plate component parts. Remove the countersunk bolts on the rear panel of
the cabinet. Attach the speaker plate to the cabinet with the bolts supplied. Fix the wall/ceiling plate in the
venue using appropriate fi xings (not supplied). Lift the loudspeaker on to the wall plate and re-assemble
the bracket parts, adjust the vertical angle and tighten all bolts.
Downfi ll Applications
The TCS62 can be mounted underneath a TCS122 or TCS152 cabinet
to provide downfi ll coverage using the TCS62-SB swivel bracket. First
disassemble the swivel bracket into its component parts. Remove the
countersunk bolts from the bottom panel of the TCS152 cabinet and
fi t the section with the elongated holes using the fi xings supplied.
Remove the countersunk bolts on the top panel and fi t the swivel bracket
using the supplied fi xings. Re-assemble the swivel bracket, angle as
appropriate and tighten all fi xings.
To install the TCS62 in a ceiling-mount application, separate the component parts as above, and fi x the
top section to the ceiling with appropriate fi xings (not supplied). Fit the other half to the TCS62 cabinet,
re-assemble the bracket, angle as appropriate and tighten all fi xings.
Loudspeaker Arrays and Clusters
An array of two or more cabinets requires the use of kits of fl yplates and inter-cabinet couplers, which are
fi xed to the cabinet sides through the M10 rigging points and assembled together in a ‘daisy chain’ fashion
to build up the required array. For all loudspeaker arrays consisting of two or more cabinets:
The number of inter cabinet coupler kits required = the number of boxes – 1, The number of fl yplate kits
required = the number of boxes.
TCS62-SB
SWIVEL BRACKET
Illustrated here are the components parts available for TCS cabinets:
TCS122-FP (WH)
Fly Plate Kit for TCS122
TCS115-FP (WH)
Fly Plate Kit for TCS115B
TCS62-SB (WH)
Swivel bracket for TCS62
TCS152-FP (WH)
Fly Plate Kit for TCS152
2 x M 8 Bolts
2 x M 8 Spring Washers
2 x M 8 Flat Washers
2 x M10 Bolts
2 x M10 Spring Washers
2 x M10 Flat Washers
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
Contents:
1 x Bracket
Contents:
Contents:
2 x Fly Plates
Contents:
2 x Fly Plates
2 x Fly Plates
TCS-FK3 (WH)
Inter-Cabinet Coupler Kit for TCS115B
TCS-FK2 (WH)
Inter-Cabinet Coupler Kit for TCS122 or TCS152
TCS-FK1 (WH)
Inter-Cabinet Coupler Kit for TCS122 or TCS152
2 x ICC
EB-10-40
Eyebolt M10 x 40mm
Contents:
2 x ICC
Contents:
Contents:
2 x ICC
Contents:
1 x Eyebolt