8
TCS Passive series
Quick Start Guide
9
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further
information about this or any other TURBOSOUND product, please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is found, please notify your
supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future
re-shipment.
System Requirements – Passive and Bi-amped Loudspeakers
TCS62 2-way loudspeaker operates as a passive system and requires only one amplifi er channel.
The input signal is divided between the low-frequency and high-frequency drivers internally with a
passive crossover.
TCS122 and TCS152 are switchable passive / bi-amp 2-way loudspeakers. Passive operation (full range
or with a subwoofer) requires 1 amplifi er channel and 1 controller channel. The input signal is
divided between the low-frequency and high-frequency drivers internally with a passive crossover.
Bi-amp operation (full range or with a subwoofer) requires 2 amplifi er channels and 2 controller channels,
one for low frequencies one for high frequencies. The input signal is divided between the low frequency
and high frequency driver in the controller and the individual amplifi ed signals are fed to the speaker input.
TCS218B subwoofer has a switchable input to allow operation in parallel or discrete modes.
Parallel operation connects both drivers in parallel internally. Operation requires 1 amplifi er channel and
1 controller channel. Discrete operation connects each driver separately to the two channels of the input.
Operation requires 1 amplifi er channel and a minimum of 1 controller channel.
TCS115B, TCS212B and TCS110B subwoofers operate as a passive system and require only one
amplifi er channel.
Correct controller settings for all models, horn variants and operation with subwoofers can be downloaded
from the website, and are also available as presents for the LMS series controllers.
To avoid wasting amplifi er power, you should use heavy-duty speaker cable, with a minimum wire size of
1.5 mm
2
(16 AWG), and preferably 2.5 mm
2
(14 AWG) for longer runs. Use larger wire sizes for the TCS212B
and TCS218B and speakers wired in parallel. For extreme cable lengths, be aware of cable impedance and
resistive losses. Always observe the correct polarity.
᧙ᄋ߸Мᮍᅽ
ࣝధ൦ಗᄋጽቬܭЧధृ
ܹᄋႄุߜڛᝐႄԁᬘǎ̪ᬎ
Ώၺࣝధ
¼" TS
ੌ੶ᩛऱତ݁
ᄋᰵַ᠐˅ˋੵܧ٩ጴǎధᄋ߸ᜊੌួ
ڪᮍႁՍಬᄋ˅ˋ̢ցᤊᛢǎ
൦ಗଣᧉ১ַ̘аߜڛఴ
ፑᎇᄋԁᬘႄԎధᝐႄԁᬘǎ
൦ಗଣᧉ১ಋᬅᄋ᧙
ᄋΏၺԤ፦οឮǎឱ឵ధ
Угǎ
࠶ॸ
˟ᥙГᝐႄԁᬘឱӉ੫ऩ఼
ᮈᄧ ੌᑁ᭨ౝǎܭа෦
ధԼΚၺਜ਼፦οΏၺᄋᦋ͉ǎឱ࠳፦ο̄
ᮋ̕ႁՍಬᄋ˅ˋ̢ցᤊᛢǎ
࠶ॸ
˟ᥙГᅍ༣ੌᝐႄԁᬘឱӉ
࠳൦ܭᎷ̇ᭂੌິ˘ǎ
൦ܭ˸ˁԼԫ͵ຶᄪధ͵ᄋࠕ
٩˸ˁԼᎷ̇Цʾݡᔊၬǎ
࠶ॸ
፦οឮ̪௨ፍՍಬᄋ˅ˋ፦
ο̢ցΏၺᄋǎ˟ᥙГᝐႄԁ
ᬘᬕ́Ώၺឮ˻ଣ҃ᄋ̀ܲឱӉᤊᛢ
͋ͶЦ߳፦οǎధ፦οڪᮍႁՍಬᄋ˅
ˋ̢ցᤊᛢǎ
1.
ឱ឵ᤉ̐ឮǎ
2.
ឱݱؔεߜᤉ̐ឮǎ
3.
ឱญਔధᄋᇩǎ
4.
ឱᥗ߷ధᄋឮǎ
5.
ឱӉڛ᭦ᤄබᄋڢஶΏၺశַ̘ǎ
6.
ឱၺࣱ࣌ຎพశַ̘ǎ
7.
ឱӉ܅܌ᤱ᮴Աǎ߸ᜊశַ̘ឱᥗ
ཱིԉࠓᄋឮǎ
8.
ឱӉ࠳శַ̘߸ᜊڛམ຺ᬅᤄ
ݡජྠ༰ߖੌЦ̘߳ၸམᄋܭ
Ӌҫ٩ǎ
9.
ឱӉሩᬕমତ݁ੌڢତ݁ᄋ߸М
ᜊᎷǎڢତ݁௨ႁˑ˕ତ܌གྷԤʸ˕
ڢ݁ੈǎᔫᬥ᠏ଣΚᄋତ݁ˁᤡՍ১
ᄋତऑឱႄࢻటʸ˕Սᤡᄋତऑǎ
10.
ݱؔεઑႄ຺ጴΏЦˁᜃᢇੌ҉
ᆢࡀЦญਔႄ຺ତ݁ǍܴၺତऑԤܭ
ᤍܬǎ
11.
ឱԷΏၺԉࠓࠁᄋᬅܭ֘ᦢ͉ǎ
12.
ឱԷΏၺԉࠓ
ࠁᄋੌᬥ᠏ᩚ
ᄋଏᢽ౷ߖ
ʽᝉ౷౷֘ಹ
ߖǎᔫΏၺଏᢽ
ୄᤃܭឱญ
ਔ߸МᎷܭ
̀ᥙГଏᢽ֘
ܭϛωᏬԫ͟ǎ
13.
᥆᫆ႄᭈᲟੌ᫃ఱˁΏၺశܭ
ឱફѤႄ຺ତ݁ǎ
14.
ధ፦οڪᮍႁՍಬᄋ፦ο̢ցᤊ
ᛢǎܭԫ૰ᭋᤊᛢ፦οΔݡႄ຺ጴੌ
ႄ຺ତ݁ԫ૰͵ุЛੌफྮᗁЛܭ
аܭᥔᭂੌԫܭˁᑠࣣᤃͼ
ੌᜃگǎ
15.
శܭᤍႄ຺ʸࠁధڢ
εઑǎ
16.
ᔫႄ຺ତ݁ੌ٩Ч
ᏺՍ٩ၺͼளႄᜊᎷ
अैε߳̈́ܬ̇ᬥԼ
ஶΨ୳ͼ࿅ঘǎ
17.
శַ̘̪ᤡၺ̇๓ફ
2000
ዜ̀ʿڢӞశַ̘
̪ᤡၺ̇᭥མࣝජό
͉ʿǎ
ฃ०ܧ
ࠬ̇͋Ͷڃڛ൦ឮ˻ଣ҃ᄋМᦋ
ੌᦋ͌ଢᤙǍڐྠੌܧᏬᤶੈᄋ૰
݀
MUSIC Group
ˁ᠈͋Ͷ᠋͋ǎ
సԡஞ֘ܲᔫధటஉিˁԴᛢ
ᤱᅽǎధᄋಗڪ˟ЦՋᒮధᏩ
ᄋ᠊̘ǎ
MIDAS
KLARK TEKNIK
TURBOSOUND
BEHRINGER
BUGERA
֘
DDA
௨
MUSIC Group IP Ltd.
ОՄᄋ
ಗੌญгಗǎ
© MUSIC Group IP
Ltd. 2014
ྡీధǎ
εο൝
ధУᮄˮᬸڅεοᄋᤡၺ
൝ԤЦ߳ᄲУθ্ឱᄇᬇ
music-group.com/warranty
Ꭻቤಋᄻߺᄋឡጻθ্ǎ
Содержание TCS110B
Страница 12: ......