23
intake is not covered by the bag.
4.
Put the top cover down and press front handle to lock the top cover, you should hear
a “bee” tone,LED screen will display “ready”.
5.
Choose the “dry” or “moist” auto vacuum seal button according to the type of foo-
d;LED screen will show the vacuum and sealing progress.
NOTE: This product provides very high vacuum pressure during vacuum packaging with
a bag, in order to avoid crushing of the delicate item by the high vacuum pressure, ob-
serve the status of the vacuum pressure inside the bag and switch the “ MANUAL SEAL”
button immediately when the desired vacuum pressure is achieved. The pump will stop
and change to heat-seal the bag.
6.
When you hear a “bee” tone and LCD screen display “complete”,then lift the handle to
open the cover and take out the packed bags.
NOTE:
• For best vacuum and sealing effect, Wipe out any excess liquid or food residue in the
vacuum chamber after each bag packaged.
• Your appliance can work only on the specific bags provided by us. Do not attempt to
use other bags not intended for vacuum packaging.
• Cut the bag straight across with scissors to open a sealed bag.
Vacuum Packaging with a Bag Using Pulse Vacuum
1.
This function is preferred for vacuum packing, when you want a slight vacuum effect
such as e.g. tomatoes, chips or similar. Or, if you have moist raw materials or a sauce,
where you just want to drain air from the bag and then stop the appliance before the
liquid is compressed.
2.
Press Pulse button, the unit start to vacuum the bag , observe the status of the
vacuum pressure inside the bag . loose the Pulse button immediately when the desired
vacuum pressure is achieved.
3.
Press the “seal only” button when the Vacuuming have been completed, the unit start
to seal the bag automatically.
NOTE: When you loose the pulse button, if you no press the seal only button in 15 se-
cond, then the bag will loose the vacuum and operation complete.
Vacuum Package in a Canister & Vacuum Bowl
1.
Wipe canister cover, canister base and ensure they are clean and dry.
2.
Put the items into the canister and do not fill up too full so that the cover can be in
good contact with the canister bowl rim. Clean the cover rim of the canister and bottom
