-24-
Revision 1/F3563
6) Remove three screws securing lintel
support to oven and remove.
Two
Screws
Three screws
Two Screws
6.3.18 DOOR HINGES
1) Remove outer glass (refer 6.3.14).
2) Undo two screws securing hinge assembly
to oven door.
3) Withdraw hinge assembly and replace.
Reassemble in reverse order.
Figure 6.3.22
6.3.19 HINGE COUNTER BRACKETS
1) Remove door (refer 6.3.14).
2) Remove screws from back of oven
securing wrapper to oven.
Figure 6.3.23
3) Turn oven onto its back and remove three
screws at each side securing wrapper,
and two securing insulation panel.
Figure 6.3.24
Two screws
Figure 6.3.26
9) Remove two screws securing insulation
panel to oven liner.
Insulation
panel
8 screws
7) Remove wrapper.
8) Undo two screws securing left hand
counter bracket to oven and remove.
Replace, ensuring that bracket is installed
with roller to top.
Figure 6.3.25
Figure 6.3.27
4) Undo three screws and remove lintel
cover.
5) Remove control panel (refer 6.2.1) and
microswitch bracket (refer 6.3.2). Place
inside oven.
