turbofan G32M, Руководство по эксплуатации, Страница: 16 / 24

Exterior
Clean with a good quality stainless steel cleaning compound. Harsh abrasive cleaners may damage
the surface.
Interior
Ensure that the oven chamber is cool. Do not use wire brushes, steel wool or other abrasive materials.
Clean the oven regularly with a good quality oven cleaner. Take care not to damage the fan or the
tube at the right side of the oven which controls the thermostat.
Oven Racks
To remove, follow instructions given in operation section.
Side Racks
To remove, lift front top to disengage and slide rack forward. To replace, slide top rear slot in rack
onto rear stud, then engage front keyhole on front stud.
Lamp Glass
To remove glasses, unscrew anti-clockwise. To replace, screw in clockwise, but do not over tighten.
Ensure that the silk gasket is fitted before replacing the lamp glass.
Oven Seals
To remove, hold at their centre point and pull forward until they unclip. Remove side seals first, then
top and bottom. The seals may be washed in the sink, but take care not to cut or damage them.
To replace, have the lip facing the oven opening. Fit the top and bottom seals first, then the side
seals.
Oven Door Glass
Clean with conventional glass cleaners.
Venting
Regularly check that the oven flue tube is free of obstruction. The flue tube must NEVER be covered.
Lubrication
No lubrication is required by the user. Components are self-lubricating. It is recommended, however,
that a light coating of grease be used on the door catches to provide smooth operation.
14
Cleaning
Caution:
ALWAYS TURN OFF THE POWER SUPPLY BEFORE CLEANING.
THIS UNIT IS NOT WATER PROOF.
DO NOT USE WATER JET SPRAY TO CLEAN INTERIOR OR EXTERIOR OF THIS UNIT.
Cleaning Guidelines