turbofan E931M, Инструкция по установке и эксплуатации, Страница: 9 / 18

Operation
7
Cooling Fan
An automatic cooling fan is integrated into the range to
maintain correct operating conditions for the appliance.
The cooling fan, when operating, ventilates air from
between the oven and control panel, out through the front
of the appliance.
NEVER block the ventilation slots between the oven
and the control panel.
The cooling fan will automatically operate when required to
ventilate the appliance.
If the oven or hob are only used at low settings and for
short periods of use, the cooling fan may not switch ‘On’.
The cooling fan will also continue to operate after the oven
and hob controls have been turned ‘Off’ for up to 1 hour
dependant on how much time the oven and / or hob
sections have been used.
For correct operation of the cooling fan, always ensure that
the power supply to the oven is switched ‘On’ at the supply
at all times.
Do not switch ‘Off’ the power to the oven after use, unless
the cooling fan has already switched ‘Off’ automatically (no
air flow coming from ventilation slots below control panel.
This will ensure correct long term reliability from your
appliance
Using the Cooktop
Element Control
Each Cooktop control knob can be turned in either direction
and set to provide any level of heating between HI and LO.
Start cooking at the highest setting and change to a lower
setting when the desired temperature has been reached.
Disc elements have the ability to store heat, so cooking is
able to continue for a time after the element has been
switched ‘Off’.
Indicator Lights
An indicator light is provided for each element and will glow
whenever the element is switched ‘On’.
Using the Oven
To Turn ‘On’ the Oven and Set the Temperature;-
Rotate ‘Oven On / Off, Bake Temperature and Grill’ Control
Knob (7) from the ‘Off’ position to temperature required.
The ‘Oven Heating Indicator’ Light (8) will remain ‘On’ until
the oven is up to temperature.
To Load the Oven;- open oven door and load product.
Avoid delays in loading the oven as this will delay the
oven’s temperature recovery.
To Set the Timer;- Rotate the ‘Timer’ Knob (5) to the
required time.
NOTE: This oven can be used without using the
‘Timer Knob’, as it is purely a timer and does
not control the baking operation of the oven.
Time Up;- When the timer reaches ‘0’ minutes the buzzer
sounds and ‘Time Up’ Indicator Light (6) illuminates. To
cancel buzzer, turn ‘Timer’ Knob (5) to the ‘Off’ position.
To Turn ‘Off’ the Oven;- Rotate ‘Oven On / Off, Bake
Temperature and Grill’ Control Knob (7) to ‘Off’ position.
The ‘Oven Heating Indicator’ light (8) will turn ‘Off’.
Using the Oven - Grill Functions
NOTE: In ‘Grill Mode’, both top heating elements will
operate and the oven bottom heating element
will switched ‘Off’.
To Turn the Oven onto Grill Mode;- Rotate ‘Oven On /
Off, Bake Temperature and Grill’ Control Knob (7) to the
maximum ‘Grill’ position. The oven Heating Indicator Light
(8) will illuminate whenever the grill elements are ‘On’.
NOTE:

Grill Mode can be used with the oven door ‘Open’ or
‘Closed’.
- with the door closed, the oven fan will operate.
- with the door open, the oven fan will stop.

If the grill mode is used with door closed, elements
will cycle ‘On / Off’ when oven temperature rises
above 300
˚
C (570
˚
F) to prevent damage to oven.
Oven fan will be on with door closed.
To Load the Oven;- Place an oven rack normally on the
top position. When the element has reached bright red (5
minutes), position the dish under grill element. Heat food
on one side and then turn dish around onto other side.
To Turn ‘Off’ the Oven when Grilling;- Rotate the
‘Oven On / Off, Bake Temperature and Grill’ Control Knob
(7) to ‘Off’ position. The ‘Oven Heating Indicator’ Light
(8) and the ‘Oven On Indicator’ Light (9) will turn ‘Off’.
Some parts of this oven will become VERY
HOT during use and could cause burns if
touched accidentally.
Caution
Important:
IMPORTANT ‐ The cooling fan is connected to the oven sec on
electrical supply.