
Fault Finding
39
Fault
Possible Cause
Remedy
The oven does not operate /
start.
The mains isolating switch on the
wall, circuit breaker or fuses are
'Off' at the power board.
The power switch on the oven is
'Off'.
Overtemp safety thermostat
tripped.
Turn 'On'.
Depress switch. Switch will
illuminate.
Reset (Button located at bottom
RH side of RH side panel). If fault
re-occurs call for service.
Oven light illuminating but fan not
working and oven not heating.
Oven door not closed properly.
Door switch or door catch broken.
Close oven door properly.
Call for service.
Bake timer does not time down.
Bake timer not set correctly.
For settings less than 10 minutes,
first set to greater setting then turn
back to desired setting.
Oven light not illuminating.
Blown bulb.
Replace bulb.
No water injection / steam.
Water not turned 'On'.
Turn water 'On' at water supply.
This section provides an easy reference guide to the more common problems that may occur during the
operation of your equipment. The fault finding guide in this section is intended to help you correct, or at
least accurately diagnose problems with your equipment.
Although this section covers the most common problems reported, you may encounter a problem not
covered in this section. In such instances, please contact your local authorised service agent who will
make every effort to help you identify and resolve the problem. Please note that the service agent will
require the following information:-
Model Code and Serial Number of the appliance. (Both can be found on the Rating
Plate located on the appliance.
C
AUTION
:
This appliance is;
For professional use and is to be used by qualified persons only.
Only authorised service persons are to carry out installation, and servicing
operations.
Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
Содержание E35C
Страница 42: ...Circuit Schematic 40 380V 3P N E 400 415V 3P N E...
Страница 49: ......