turbofan 30D Series E31D4, Руководство по обслуживанию

Страница: 18 / 30

Service Procedures
16
Parameter
Number
Description Min Max Default Value S/O
P1 Temperature Scale
˚ C ˚ F ˚ C
˚ C( ˚ F) S
P2 Oven Model.
31 32 31 ---- S
P3 Minimum Temperature Setpoint. 0(32) 300(572) 60(140) ˚ C( ˚ F) S
P4 Maximum Temperature Setpoint
0(32) 300(572) 260(500) ˚ C( ˚ F) S
P5 NOT SHOWN WHEN P2 SET TO 31
PrH Pre-heat Temperature.
P3 P4 150(325) ˚ C( ˚ F) O
P7 NOT SHOWN WHEN P2 SET TO 31
P8 Hysteresis Temperature Gap. 1 10 1 ˚ S
P9 Temperature Regulation Offset.
0 10 0 ˚ S
P10
Chamber Temperature Offset.
(This offset is always added to the raw temperature measurement, in order to
correct the value. The value shown on the display is the corrected value).
-25(-45) 25(45) 20(36) ˚ C( ˚ F) S
P11 Maximum Timer Setpoint.
1 180 180 Min S
P12 Timer Preset.
1 P11 0 Min S
L-O Time Light stays on 0 60 0 Min O
P14 NOT SHOWN WHEN P2 SET TO 31
P15 NOT USED WHEN P2 SET TO 31 .
0 60 10 Min S
P16 NOT SHOWN WHEN P2 SET TO 31
P17 NOT SHOWN WHEN P2 SET TO 31
VoL Buzzer Volume
0 10 5 ---- O
P19 Grill Temperature Setpoint 0(32) 300(572) 280(536) ˚ C( ˚ F) S
P20 NOT USED WHEN P2 SET TO 31 .
0 1 1 ---- S
P21 Program Mode - Pre-heat temp condition.
0(32) 30(54) 20(36) ˚ C( ˚ F) O
P22 Door open time—Program Mode Only
30 180 60 Sec S
5.4.1 Controller Parameters
1) With the controller off, press Grill/Broil and Start/
Stop for 5 seconds.
2) Is displayed in the Temperature display.
3) Turn the timer encoder knob until
is
displayed in the Timer Display.
4) Push the Light button to enter.
5) Temperature display indicates current parameter,
Timer display indicates the parameter value.
6) See table for allowable values, default settings
and descriptions. Note 31 has to be set at P2.
5.4 Controller Parameters
1) To change the parameter turn the timer encoder
knob.
2) To enter the parameter, to change it’s value,
press the light button.
3) To change the value turn the timer encoder knob.
4) To enter the value press the light button.
5) Press on/off button to exit.