turbofan 30D Series E31D4, Руководство по обслуживанию

Страница: 16 / 30

Service Procedures
14
5.2.8 Temperature Probe
1) Remove control panel (refer 5.1.1).
2) Remove probe connection from controller.
5.2.9 Top Element
1) Remove back panel.
2) Remove element wires from terminals.
3) Remove baffle plate.
4) Remove securing screw.
5.2.10 Bottom Element
1) Remove back panel.
2) Remove element wires from terminals.
3) Remove bottom element cover and baffle plate.
4) Remove securing screws.
Probe connection
3) Remove back panel.
4) Pull cable to rear of oven.
5) Undo probe securing screw inside oven.
6) Withdraw probe from rear of oven.
Probe screw
Element screw
Element screws
5.2.11 Door Inner Glass
1) Undo inner glass retaining clip.
2) Lift inner glass up and pull bottom outwards to
free bottom pivot. Note spacer is a loose fit over
the pivot and may fall out.
3) Lower inner glass to free top pivot and remove
glass.
Retaining Clip
Pivot Spacer