10
Getting Started
Before Using the Ovens
Initial Cleaning
Before the fi rst use of each oven, wipe the
interior with soapy water and dry thoroughly.
Loading the Software
This fi rst time you turn on the oven after
installation, the oven will load the software.
This process should take no longer than 10
minutes.
DO NOT
attempt to operate the
oven while the software is loading.
Note:
Holding down the left (upper) power
off button for 5 seconds will relaunch the
software.
Note:
To fully relaunch software and the
memory and program code (the "fi rmware"),
the oven must be powered off at the circuit
breaker.
Setting the Clock and Personal
Preferences on the Utilities Screen
You can access the Utilities screen from any
screen. Tap the three dots above the clock
(shown below) to access the Utilities menu.
For more information about using the features
under utilities, go to pages 46-47.
For access to the utilities, including the clock,
and the timer, tap the three dots above the
clock time on the tab in the middle of the
bottom of the screen. The tab will pull up,
showing two sections, one for utilities and
one for the timer, as shown below:
Use the utilities to set the clock or alter
personal preferences such as the display and
the sounds.
The egg timer, which is independent of other
timers on the unit, can also be accessed from
this screen.
For information on using the
timer, see page 43.
