TurboChef Sota, Руководство пользователя

Страница: 22 / 32

14 INFO MODE / EDIT MODE
Updating the Oven Firmware
CAuTIoN: The oven will be inoperable if
the firmware update is unsuccessful!
From the oven off screen,
1. Insert the smart card “1 of 3” (Figure 17).
2. When the oven is cooling down or off, press
and hold the Info key until the oven resets
(approximately 5 seconds).
3. The oven will produce a series of short beeps.
When the oven beeps one long tone, insert
card “2 of 3.”
4. The oven will again produce a series of short
beeps. When the oven beeps one long tone,
insert card “3 of 3.”
5. The oven will again produce a series of short
beeps. When the oven beeps one long tone,
remove the smart card.
6. The oven will restart, indicating the update is
complete.
NoTE: If the update is unsuccessful, the display
will remain off and the oven will beep one long,
low tone. If the update fails multiple times, contact
TurboChef as a card may be damaged.
Overview of the Edit Mode
To access the Edit Mode,
1. Enable it from the Set options screen (Figure
14, page 12).
2. Press the on/off key to return the oven to the
“Cooling Down” or “off” screen.
3. Press the on/off key again to enter Edit
Mode.
The Edit Mode serves three main purposes:
1. Edit set temperatures
2. Edit names of food groups and items.
3. Edit cook settings
Menu Structure
The oven allows use of either one or two set tem-
peratures and can store settings for up to 256
items (128 per temperature).
Changing Set Temperatures
If a menu was loaded via smart card (page 13), the
temperatures are already set and do not need to be
changed.
The set temperature should never be changed to
compensate for over-cooking or under-cooking. If
recipe settings are not cooking as desired, consult
your menu developer, authorized distributor, or
TurboChef Customer Support.
To change a set temperature,
1. Place the oven in Edit Mode (see adjacent).
2. Press the L2 soft key to change temperature 1
or L4 soft key to change temperature 2
(Figure 18).
3. using the number keys, enter the new set
temperature.
4. Press the Enter key to confirm the change, or
the back/Stop key to cancel.
Figure 18: Temperature Edit Screen
TEMP 2: 350F
TEMP 1: 500F
VALID RANGE BET WEEN 350F - 525F
EDIT temp 2 GROUPS
EDIT temp 1 GROUPS
R1
R2
R3
R4 L1
L2
L3
L4