TurboAce ALLSTEADY-6, Руководство пользователя

Страница: 15 / 20

14
V. PROGRAM MODES
The Allsteady 6 has 5 pre-programmed operating modes. These different modes affect how the gimbal
controller behaves. These modes do not affect operating position (i.e. inverted mode, briefcase mode). For
more information on operating positions, see section
VI below.

Mode 1 – Small Camera, Full Follow
Mode 1 is a full follow mode tuned for small cameras. When panning and tilting the gimbal using the handlebar, the
camera will follow all of your movements at a fast pace. The roll axis will always be level. Fast twitch and accidental
movements are neutralized by the gimbal controller and will not adversely affect the movement of the camera. The gimbal
will be constantly working to provide stable footage with smooth panning and tilting movements.
o
To activate mode 1, press the joystick button one time and wait 1 - 3 seconds.
o
Small cameras are approximately 1625 grams and under. (Canon 5D Mk 3 with the EF 16-35mm F2.8L and under)

Mode 2 – Medium Camera, Full Follow
Mode 2 is a full follow mode tuned for medium sized cameras. When panning and tilting the gimbal using the handlebar,
the camera will follow all of your movements at a fast pace. The roll axis will always be level. Fast twitch and accidental
movements are neutralized by the gimbal controller and will not adversely affect the movement of the camera. The gimbal
will be constantly working to provide stable footage with smooth panning and tilting movements.
o
To activate mode 2, press the joystick button two times consecutively and wait 1 - 3 seconds.
o
Medium sized cameras are above approximately 1625 grams. (Canon 5D Mk 3 with EF 24-105mm F4L and up)

Mode 3 – Large Camera, Full Follow
Mode 3 is a full follow mode tuned for large sized cameras. When panning and tilting the gimbal using the handlebar, the
camera will follow all of your movements at a fast pace. The roll axis will always be level. Fast twitch and accidental
movements are neutralized by the gimbal controller and will not adversely affect the movement of the camera. The gimbal
will be constantly working to provide stable footage with smooth panning and tilting movements.
o
To activate mode 3, press the joystick button three times consecutively and wait 1 - 3 seconds.
o
Large cameras are above approximately g. (Canon 5D Mk 3 with EF 24-105mm F4L and over)

Mode 4 – Small Camera, Accessory Mode (Default mode when gimbal is turned on)
Accessory Mode allows you to operate the gimbal without the top handle and joystick, a setup that allows you to mount
the gimbal on a tripod/crane/jib. This mode behaves much the same as the Fast Follow Mode 2.
o
By default, mode 4 will be the mode selected when powering on your gimbal.
o
Use mode 4 whenever the top handle and joystick are removed from the gimbal.
o
By default, this mode will be a full follow mode. If you purchased the Wireless Remote Joystick, this will by a
Locked Mode . In the Locked Mode the camera will remain in a fixed position, only moving with input from the
Wireless Remote Joystick.

Mode 5 – Medium Camera, Accessory Mode
This mode is identical to Mode 4, though it is tuned for the medium camera settings.
o
To use this mode, the default mode must be changed using a PC or Mac. Please visit www.turboace.com for detail
instructions.
Note: When powering the gimbal on and off, the gimbal will always default to Mode 4. Please remember to change the
mode for your camera every time you turn on the gimbal.