TurboAce ALLSTEADY-6, Руководство пользователя

Страница: 13 / 20

12
IV. OPTIONAL EQUIPMENT
Articulating Monitor Arm Installation Guide
The articulating arm is an extension of the monitor bracket that allows the monitor to be moved freely and be
placed at multiple angles for optimal viewing.
1. Align the 6mm diameter-articulating-arm screw to the open slot of the bracket.
2. At the slot opening, locate the indented cavity.
3. Please turn the arm in a clockwise manner or else the screws may not be fitted through the opening
properly.
4. Next align the 2 flat keys of the arm to the slotted cavity. The flat keys are designed to prevent the
bracket from turning during operation.
Tuning Stand
The tuning stand is a very useful tool for the Allsteady 6 gimbal. The stand allows you to hang the gimbal by
the handle bars, allowing the camera tray to rotate freely. This is very important for balancing, tuning, and
setting down the gimbal when not in use.
To open the tuning stand, follow these instructions.
1. Chose an arm to unfold and loosen the thumbscrew by rotating in the counter-clockwise direction.
2. Do not completely unscrew this knob, only enough to free the arm from the notch and allow you to
rotate the arm around into position.
3. The arm will stop when it’s in position. Rotate the thumbscrew clockwise to tighten the screw and
lock the arm into position.
4. Repeat the process to unfold the rest of the arms.