TurboAce All Steady 7, Руководство пользователя, Страница: 15 / 18

14
VI. PROGRAM MODES
The Allsteady 7 offers 5 programmed modes; each mode having the ability to be switched by pressing the
button located behind the joystick. These modes are perfect for achieving different shots and can be very
useful.
Note: The default setting is Mode 4 . That means any time the AllSteady-7 is powering up, that is the mode it
is automatically set to.

Mode (
1)
o
This mode will put your gimbal in No Follow . This means the gimbal will only stabilize and will
always be looking forward.
o
To change the user to Mode 1, please press the button once.

Mode (
2)
o
This mode will put your gimbal in Pan Follow . This means that only to top pan motor will
follow wherever the handles go. So if you pan the handles to the left or right you will notice the
camera would follow.
o
To change the user to Mode 2, please press the button twice .

Mode (
3)
o
This mode will put your gimbal in Full Follow Slow . This means the gimbal will follow in both
pan and the pitch. If you tilt the handles up you will see the camera follow upwards. If you pan
the handles right or left you will also see the pan follow.
o
To change the user to Mode 3, please press the button three times .

Mode (
4)
o
This mode will put you r gimbal in Full Follow Medium Speed . This means the gimbal will
follow for both pitch and pan at a quicker speed relative to Mode 3
o
To change the user to Mode 4, please press the button four times .

Mode (
5)
o
This mode will put you r gimbal in Full High Speed . This is the fastest speed for any of your Full
Follow modes and acts the same as your previous two Modes.
o
To change the user to Mode 5, please press the button five times .