12
IV. GIMBAL BALANCING STAND
Before using the stand, please make sure the 6mm diameter round-key lock (which is located below the
thumb screw-head) is completely inserted within the circular opening of the track. These screw keys will lock
the arms into position and prevent the stand from closing. Brand new units usually require a hex driver to
break in the openings. You may need to jiggle the arm while inserting the screw. After the arms have been
locked into place, open the legs of the stand and insert the provided lock pin as shown on the right figure
below. A list of steps are provided in the picture
1.)
Open the balance stand legs and lock them into place
2.)
Hold the left leg with your left hand
3.)
Brace the right leg with your right elbow
4.)
Insert the right side of the locking pin into the right stand hole
5.)
Stretch stand legs open and insert the left lock pin into the left hole.
Содержание All Steady 7
Страница 1: ...redefining flight ALLSTEADY 7 GIMBAL MANUAL V1 1...
Страница 3: ...2 TURBO ACE ALL STEADY 7...