TBS-223 Wireless Vehicle detector
REV 1.0
15
6)
Click “Auto Install”, to wake up the device and join requested will be sent. The
sensor will also run the startup calibration in the meantime.
7)
The installation process is done and the server should receive the 1
st
device
parameter message and also 2
nd
sensor status message
Figure 11. Auto install
c. Turn the device into Deep Sleep mode
Once the device installed and activated, it does not require to turn into Deep sleep
mode unless there is requirement for relocation. The device could be set into Deep
Sleep mode by using the above App; however, passcode is required
.
1) Click “Permission” and key in the 4-digitals password
2)
The “Deep Sleep” is enabled now,
click “Deep Sleep” button, and wait for 1-2
