TBS-223 Wireless Vehicle detector
REV 1.0
11
TBS-223 supported Epoxy mount via Cradle base or drill hole screw mounting
A. Drill hole screw mounting
1. Find the Parking space for install the parking sensor.
2. Mark the sensor hole on the ground and drill 4 holes
a)
Find and mark the centre of the desired detector location. Shown as figure 7:
Figure 7, the desired location
b)
Core 4 holes (approximately 8 mm in diameter, and 60mm deep) into the
road.
Figure 8. Drill 4 hole
3. Install 4 expansion crews
Install four expansion crews on the TBS-223, as shown in figure 6.
Figure 9 install 4 expansion screws
