Turbo incanto, Инструкция по установке и эксплуатации

Страница: 10 / 20

10
5) If the glass canopy has not been pre-assembled by the
factory, then it should be fixed to the top of the main body of
the cooker hood at this stage.
6) Lift the main body of the cooker hood onto the angle bar and
then fix it into position using the 16 x M5 screws.

IMPORTANT: This stage of the installation process
MUST be completed by two people.

IMPORTANT: The 16 x M5 screws MUST be securely
tightened.
7) If you are going to be using the hood in extraction mode, you
should fix the ducting hose to the ceiling.

The electrical connection must correspond to the electrical requirement noted on the rating
plate, which is placed inside the cooker hood. The appliance should now be connected to
the electrical supply.

Check that the appliance is operating correctly by selecting each speed and switching the
light bulbs on and off.

Remove the hanging hook and then slide the lower chimney section downwards, until it
rests against the main body of the cooker hood.

Use a stainless steel cleaner and polish on the stainless steel sections of the appliance.

If you are using the appliance in recirculation mode, then you should now fit the carbon filter.
See the “fitting the carbon filter" section on page 9.