operates only when there is
speed input and is dis-
played In the Digital
Display Area of the screen
Trip Distance (DST)-
Trip distance mode will
record up to 999.99 miles
or kilometers and then roll
to zero. The trip distance
can be reset by pressing
the “SET” button for three
seconds. The resolution is
0.01 miles (0.01
Kilometers). The trip dis-
tance is shown on the
lower line if the screen.
Odometer (ODO)-
The odometer will record
the total distance traveled
up to 99,999 miles or kilo-
meters and then roll to
zero. The odometer can be
reset by pressing the “SET”
button for three seconds.
The total distance is shown
on the lower line if the
screen.
Programmable Odometer-
The odometer digits are
programmable. This is
convenient for transferring
your hard-earned mileage
that is usually lost when
changing batteries or
Computers.
Clock-
Your Turbo® Sport is
equipped with a digital
clock. The clock can be set
to operate in either 12 or
24-hour mode.
Second Wheel Option-
For riders who own more
than one bicycle or who
frequently change tires, the
13
Maximum Speed
(MXSPD)-
The Maximum Speed is
shown on the lower line of
the Digital Display Area up
to 99.9 M/h (99.9 Km/h)
with a resolution of 0.1
M/h (0.1 Km/h) The max-
imum speed is retained in
memory and updated
when a higher speed is
maintained for three sec-
onds. The maximum speed
can be reset by pressing
the “SET” button for three
seconds. (See figure 13)
Auto Start/Stop Timer
(ATM)- In ATM mode the
timer function records the
actual time spent riding. It
12
Turbo® Sport is capable of
storing two tire sizes. You
can change between the
two sizes by entering
Distance Mode and select-
ing TRIP. Then, press the
“MODE” button for three
seconds. The second wheel
mode indicator will change
from 1 to 2. Mileage
recorded will be cumulative
between the two sizes. (An
accessory handlebar mount
is available from your
Specialized dealer. P/N
4814-5045
TROUBLESHOOTING:
Display is blank:
Change the battery or
press the AC button on the
bottom of the case
Display shows
partial digits:
Press the AC button on the
bottom of the case.
Speed/distance not record-
ing: Check sensor/magnet
alignment. Make sure that
the sensor is no more than
1/16” (2mm) from the
magnet. Replace transmit-
ter battery if necessary.
FIGURE 13
FIGURE 14
