odometer setting is correct
push the “SET” button five
times to exit odometer
mode. (Otherwise, see
“Setting the programmable
odometer” below).
3. Setting the
Programmable Odometer:
This mode is useful if you
have replaced the battery
and would like to retain the
mileage you have already
ridden. To access the
Programmable odometer
mode, first advance to the
Odometer Mode by press-
ing “MODE” button until
ODO appears in the Dot-
matrix Display Area. Hold
down the “SET” button for
three seconds (If you have
selected English language,
the Km/h indicator will
flash. If the Km/h setting is
correct press the “SET” but-
ton once) and a five-digit
number will appear. You
are now in the program-
mable odometer mode. To
enter a mileage into the
odometer, press the
“MODE” button until the
flashing digit is correct.
(Note: The “MODE” button
may be held to quickly
scroll to the correct digit.)
Press the “SET” button to
select the next digit to the
right. Repeat this process
until all five digits are
entered as your existing
mileage. (See figure 7)
4. Wheel Circumference
Selection:
To set the circumference for
the type of tires you are
using, you can use
Specialized’s “Easy
Calibration Mode” or
measure your actual tire
circumference by the roll-
out method. Two different
tire diameters may be
7
Display Language
Your Turbo® can display
information on the dot-
matrix display area in six
different languages:
English (ENGL), German
(GER), French (FR), Italian
(ITA), Dutch (NED), and
Spanish (ESP). To select
your language push the
mode button repeatedly
until CLOCK is displayed in
the Dot-matrix Display
Area. Then, depress hold
the “MODE” button for
three seconds. The selected
language will be dis-
played. Use the “MODE”
button to scroll through the
languages. When the
selected language is dis-
played (default language is
English), press the “SET”
button once to confirm
your selection and exit dis-
play language mode.
2. Miles or Kilometers
selection:
Your Turbo® Sport will
record distance and speed
in either miles (m & m/h)
or kilometers (K & Km/h).
Please note that miles can
only be selected when the
language setting is English.
All other languages display
only kilometers. (See
“Setting the Display
Language” above). To
enter your selection of
miles or kilometers, push
the “MODE” button until
ODO appears in the Dot-
matrix Display Area (This
is called the odometer
mode). Next, hold down
the “SET” button for three
seconds. The “Km” or “m”
indicator will begin blink-
ing. You may now alter-
nate between miles and
kilometers by pressing the
“MODE” button. When the
correct choice is flashing,
select it by pressing the
“SET” button. You will now
enter the “Programmable
Odometer” mode. If the
6
CLOCK
I
ODO
I
TRIP
I
AVSPD
I
MXSPD
I
ATM
FIGURE 7
