Fault Handing
Using Caution While Operating
Fail safe function setting
Safety Precautions
General Care
1. Always use clean, dry cloth or soft bristle brush to clean your equipment.
2. Never use chemical cleansers, as these could damage the sensitive electronics and plastics.
Please turn on the TX, then pull the TH trigger anywhere you want to and hold it, press the SW button
of the receiver about 2sec,the LED should start flashing for 5sec,then release SW button and
TH trigger, turn off the TX.
When there is no backward function and can’t find centre bit, please check the TRIM on centre or not.
www.turboracinghobby.com
INSTRUCTIONS MANUAL
