Turbo Incanto TIM29, Инструкция по эксплуатации

Страница: 16 / 23

16
Care and Cleaning
What? How? Important!
Everyday soiling
on
glass
(fingerprints,
marks, stains left
by
food or
non-sugary
spillovers on the
glass)
1. Switch the power to the
cooktop off.
2. Apply a cooktop cleaner
while the glass is still
warm (but not hot!)
3. Rinse and wipe dry with
a clean cloth or paper
towel.
4. Switch the power to the
cooktop back on.
• When the power to the
cooktop is switched off, there
will be no ‘hot surface’
indication but the cooking
zone may still be hot! Take
extreme care.
• Heavy-duty scourers, some
nylon scourers and
harsh/abrasive cleaning
agents may scratch the
glass. Always read the label
to check if your cleaner or
scourer is suitable.
• Never leave cleaning residue
on the cooktop: the glass
may become stained.
Boilovers, melts,
and
hot sugary spills
on
the glass
Remove these
immediately with a fish
slice, palette knife or razor
blade scraper suitable for
Induction glass cooktops,
but beware of hot cooking
zone surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or
utensil at a 30° angle
and scrape the soiling
or spill to a cool area of
the cooktop.
3. Clean the soiling or spill
up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for
‘Everyday soiling on
glass’ above.
• Remove stains left by melts
and
sugary food or spillovers as
soon
as possible. If left to cool on
the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety
cover
is retracted, the blade in a
scraper
is razor-sharp. Use with
extreme
care and always store safely
and
out of reach of children.
Spillovers on the
touch controls 1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control
area with a clean
damp sponge or cloth.
4. Wipe the area
completely dry
with a paper towel.
5. Switch the power to the
cooktop back on.
• The cooktop may beep and
turn
itself off, and the touch
controls
may not function while there
is
liquid on them. Make sure you
wipe the touch control area
dry before turning the cooktop
back on.