background image

 

Operation 

Operate and display requirement 
 

(1)

 

Standby status: 
Plug  in  and  connect  to  the  electrical  supply,the  buzzer  will“beep”  andall  indicator  lights 
and all characters on thedigital display are lit on for 1S and the child lock indicator lights 
are not on,indicating that the induction cooker is in standby state. 
 

(2)

 

Work status: 

A:"on / off" buttonusedfor switching on and off the induction cooker 

a:  In  the  standby  mode,  press  the  “+”  button  or  “-”  to  turn  on  the  burner  to  enter  the 
working mode. The default P1 firepower, the digital tube displays P1. 
 
b:  In  the  working  state,  press  the  “ON/OFF”  button  to  turn  off  the  working  state  of  the 
burner and return to the standby state. 

 

B: Power level adjustment  

In working mode,press the +/- button to adjust the power level. 
Each time the“+” button is pressed, the power level increases by one unit; Each time the “-” 
button is pressed, the power level reduces by one unit; 
Power level:P1,P2,P3,P4,P5,P6,P7,P8,P9. 
Min power level:P1 
Max power level:P9. 
During  the  cooking  process,  various  faults  can  be  detected.  If  that  occurs,  the  appliance 
will enter intofault alarm processing state. 
 

Power management 

Each burner is 2000W max. If both burners are set to max power P9, the second burner 
that is turned on will beset at max power and reduces the power of the first burner. At any 
time, the total max power is set at 3000W. 
 

C: Timer Control(It is valid only under working state) 

Under working status, press “timer”button to set the timer.Digital tube display the timing 
and flash, press the +/- button to set the timer.After adjusting the time, press timer button 
one time to enter the timing state, or 5 seconds no operation of the key will automatically 
enter the timing state. The timing time is displayed at this time. 
 
Each time the“+” button is pressed, the timer increased by one minute; Long press (hold 
for 3 secs) “+”button,the timer will be incremented by minutes. 
Each  time  the  “-”  button  is  pressed,  the  timer  reduced  by  one  minute;Long  press  “-
”button,the timer will be reduced by minutes. 
Min time:1 minute 
Max time: 99 minutes. 
Adjustable time range:0-99 minutes not recyclable. 
 
The first time a timer is set, the default timing starts at "00".The corresponding induction 
cooker will automatically switch off after the timing time is reached. 

Содержание TIA732


















Отзывы: