Turbo Incanto TIA732, Инструкция по эксплуатации

Страница: 8 / 17

7
Installing the hob
WARNING
Risk of cutting.
Be careful of cutting edges.
End parts in foamed plastic - be careful.
During transportation these could cause slight injury or cuts.
Remove the material and envelope of documents from the packaging.
Before proceeding with installation read the work instructions carefully.
Step.1
Put a towel or cloth on the work surface.Place the hob face down
on the protected surface.
Step.2
Apply the strip seal,supplied with the hob,which is for sealing it onto
the work surface.
Do not use silicone. Apply the seal to the edge of the bottom of the
hob,leaving about 3mm from the edge of the glass.
Apply the seal all around the circumference.
Cut any excess and bring the two ends of the seal together so they
match.
Step.3
Fix the brackets on the front side and rear side by screw.Put the induction hob in the cut-out
cabinet.
Attention:

The electric hob is recommended to be installed by professional. Please never conduct the
operation by yourself.

The wall and the heating area above the table surface shall withstand heat.

To avoid danger, the induction cooker hob must be installed into the cabinet before use.

Applicable cabinet material: wood, marble resin etc.