background image

FR

E

QUENT

L

Y

 

A

S

K

ED

 

QU

E

STIO

N

S

 

(F

A

Q

'S)

A-5

Question:

Sometimes I hear a humming sound coming from my

regulator. What causes this? 

And -  

My grill has a low

flame and sometimes will not light. Why?

Answer:

The humming sound is gas flowing through the regulator.

A low volume of sound is normal and will not interfere
with the operation of your grill. Loud or excessive regulator
humming and/or low flow and intermittent lighting  may
be caused by the regulator's excess gas flow device.
Opening the tank valve all the way or too quickly is what
triggers the regulator's safety device to restrict gas flow,
preventing excess gas flow to your grill. Lighting the main
Burner farthest from the fuel source every time will help
eliminate  air  pockets  in  the  manifold.  Note:  This
procedure should be done every time a new LP Gas tank
is connected to your grill.

Question:

Can I convert my grill from one fuel type to another in

other words from LPG to NG or vice versa?

Answer:

Never

  lean  over  the  grill  cooking  area  while

lighting  your  gas  grill.  Keep your face  and  body
a safe distance (at least 18 inches) from the front
of  grill  when  lighting  your  grill  by  match.

  WARNING

!

!

Where do I use my grill for safer operation and better
performance?

Question:

Answer:

Strong winds and low temperatures can affect the
heating and performance of your gas grill so factor
in  these  elements  when  positioning  your  grill
outdoors for cooking.

    

windy conditions

, always position the front of

grill to face oncoming wind to reduce smoke and
heat blowing in your face and prevent potential haz-
ards to yourself and grill.

Use your grill at least 3 feet away from any wall or
surface.

Use your grill at least 3 feet away from combustible
objects that can melt or catch fire (such as vinyl,
wood siding, fences and overhangs) or sources of
ignition (including pilot lights on water heaters and
live electrical appliances).

Never

 use your gas grill in a garage, porch, shed,

breezeway or any other enclosed area.

Never 

use  your  gas  grill  on  a  balcony,  deck,  or

patio  above  the  ground  floor  of  your  home.

Never 

obstruct the flow of ventilation air around

your gas grill housing.

No, your gas grill is manufactured to exact specifications
and is certified for Liquid Propane Gas (LPG) or Natural
Gas(NG) use only. For your safety, conversion kits are
not available, nor will we sell or otherwise provide parts
or information to be used to convert your grill. Any attempt
to  convert  your  grill  is  dangerous and  will  void  your
warranty.

If your ignition fails to work or your battery needs replac-
ing, you can light your grill using the Manual Lighting
Stick. The Lighting Stick is designed to hold a paper
match and allows you to safely insert a match through
the Cooking Grid without getting close to the Burner. To
light your gas grill manually, insert a paper match into the
Manual
Lighting Stick and follow steps 1 through 5 of the Basic
Lighting Procedures. Then, light the match and place the
Lighting Stick through the Cooking Grid. Turn the corre-
lated main Burner Control Knob to the    setting to re-
lease gas.The Burner should light immediately.

Question:

If my ignitor or battery is not working how can I light
my grill manually?

And 

 - Why would I need the lighting

stick that hangs from the side of my grill?

Answer:

Turn gas off at source and turn Control Knobs OFF.
Wait at least 5 minutes for gas to clear, then retry.

Question:

My grill will not light properly. Why?

Answer:

     Always light the Main Burner farthest from the fuel source

first.  This will draw gas  across the  manifold  helping
prevent air pockets which obstruct gas-flow and prevent
proper grill lighting. Also try this procedure:

     3.

    1.

   2.

If no leaks are detected, wait 5 minutes for any gas to
clear and repeat the lighting procedure.

If your grill still fails to light, turn the Burner Control
Knob(s) and gas source OFF and conduct a leak test
of ALL gas connections and gas sources as explained
in the Use and Care section of this manual.

Question:

Are the serial and model numbers of my grill listed

     somewhere for reference?
Answer:

The serial  and  model  numbers are listed on a  silver
CSA label placed on the grill. This label is located on the
Bowl Rear Panel.

Turn all Control Knobs to the OFF position.
Turn off the LP Gas tank at the tank valve.
For Natural Gas close Shut Off  NG Valve.
Disconnect regulator from LP Gas tank.
For Natural Gas disconnect regulator from
12 ft. Natural Gas Hose.
Let unit stand for 5 minutes.
Reconnect regulator to the LP Gas tank.
For Natural Gas reconnect regulator to 12 ft.
Natural Gas Hose.
Open grill Lid.
Turn the tank valve slowly 

¼

 of one turn.

For Natural Gas open Shut Off valve.
Light main Burner farthest from fuel source.
Turn the tank valve slowly one more 

¼

 of one

turn for 

½

 of one complete turn.

Continue to light Burners moving towards
the fuel source.
Do not turn tank valve more than 

½

 of one

turn on LPG models.

In

Содержание BTE3221ALP



































Отзывы: