Turbo Air TD-4R, Инструкция по установке и эксплуатации

Страница: 4 / 16

4
PACKAGING MATERIAL
LIGHTS
SHELVES
Remove all tape that holds life up glass and doors in place. Some residue will be left
and this can be removed with glass cleaner.
Remove all plastic ties that hold shelves and brackets for shelves.
Make sure lights are in their lamp holders. Also make sure plugs for lamp holders are
completely plugged in. If they are loose it may cause lamp holder to burn.
To install shelves in desired position front glass must be open and rear doors removed.
Where shelf height is desired install the shelf support in shelf standard slot (see drawing).
Install shelves on rear shelf support as shown. Curved part of shelf must be toward
rear of case if not air flow will be blocked. Snap shelf into retainer clip on the shelf
support, this keeps shel from moving (see drawing).