Turbo Air MST-24S-N6, Инструкция по установке и эксплуатации

Страница: 14 / 24

14
OPERATION AND DISPLAY PANEL
1. Plug unit into the correct outlet. The power switch is located on the back side of the
unit. Flip the power switch ON. Display panel should light up if these steps are
followed correctly.
2. The default temperature (“Set Point”) is set to 37°F (for Refrigerators).
3. The compressor is set to automatically cycle based on the cabinet temperature, and
is controlled by the main PCB (“Controller”).
4. The defrost cycle is set to automatically cycle and is controlled by the Controller,
as well as the door switch.
Evaporator Fan Light
Defrost Light
Auxilliary output Light
Clock(RTC) Light
Alarm Light
Compressor Light
Inner Temperature Display
Model: MST-24S-N6