Turbo Air MST-24S-N6, Инструкция по установке и эксплуатации

Страница: 13 / 24

13
OPERATION AND DISPLAY PANEL
1. INTRODUCTION OF KEY FUNCTION
2. TEMPERATURE CONTROL
1) Default downtime temperature 39°F, boot temperature 47°F
2) Temperature adjustment, long press SET key for 3 seconds, enter the user
menu, display SET, press SET key again to display ST parameter value, at this time, you can
operate or modify the temperature setting value. When ST is displayed, PO is displayed by
pressing the key and 00 is displayed by pressing the key set. At this time, password correct
ness can be automatically verified by or input controller administrator password 55.
When password is verified, ST and C1, C5, C6 can be selected by or key to adjust the
shutdown temperature and start-up temperature, and set the temperature range. After selecting
the menu item, press the set key to enter the current parameter setting, press or to adjust
the parameter value, and then press the set key to return to the menu selection.
3) Under any parameter setting, pressing the key or 30 seconds keyless operation exists
the parameter setting and automatically saves the current parameter value.
Rst
Rst
Set
Button name
Set
Set parameters
Switch between menu and parameters
Press if for 3 sec.
Press it and the controller responds.
Adjust menu and parameters
Turn on/off light
Upload parameters to the copy card
Press if and the controller responds.
Press if and the controller responds.
Press it for 3 sec.
Adjust menu and parameters
Download parameters to the copy card
Press if and the controller responds.
Press it for 3 sec.
View the temperature value of evaporator sensor
Exit setting parameters
Force defrost to start defrost
Press if and the controller responds.
Press if and the controller responds.
Press it for 3 sec.
Function Action
Rst
Model: MUR-20S-N6
MUR-24S-N6
MUR-27S-N6
MWR-24S-N6
MWR-27S-N6
MWR-34S-N6
MUR-34S-N6
MUR-20SG-N6
MWR-20S-N6