Turbo Air Direct Cooling Series, Инструкция по установке и эксплуатации

Страница: 12 / 20

12
OPERATING INSTRUCTIONS
Level and set your sushi cases in place. Connect all necessary electrical
connections. Your sushi cases should now be ready for use.
POWER SWITCH (SAK-50*-N, SAK-60*-N, SAK-70*-N)
Located at the bottom of rear panel.
POWER SWITCH (SAS-50*-N, SAS-60*-N, SAS-70*-N)
Located at the Top of rear panel.
LIGHT SWITCH (SAS-50*-N, SAS-60*-N, SAS-70*-N)
Located at the Top of rear panel.
TEMPERATURE CONTROL (SAS-50*-N, SAS-60*-N, SAS-70*-N)
Located at the Top of rear panel.
HOW TO SET THE TEMPERATURE
PRODUCT PLACEMENT
Overloading of product or placing products against the back wall or suction grill may
cause disruption to air flow, which may cause the unit to not cool properly.
NOTE
• Do not place products into your merchandiser until the desired temperature is reached.
• Do not place hot products into the merchandiser.
1. Press the SET button for one second to check the temperature setting.
2. The display panel shows the current temperature.
3. To change the temperature, press the UP or DOWN button and press
the SET button when adjustment is complete.
4. The temperature setting has been changed and the display panel shows
the current temperature.
set
set
MANUAL DEFROST
1. Press the DEFROST button for three seconds to begin a manual defrost.
2. Defrost mode will turn off automatically when it is complete.
3. To manually stop the defrosting process, hold the DEFROST button
for three seconds.