Congratulations on your choice of the Tupp Buddy by Tupperware for keeping your drinks warm
or cold. Please read and follow the use and care instructions carefully and you will enjoy your
Thermal Flask for many years.
alSDFGJMH
Composition:
(a) Cup
(b) Insulated Cap
(c) Gasket (removable)
(d) Thermal Flask
(e) Non-slip pad
Use & care
• For best results, it is recommended to first fill the product by filling with hot (not boiling) water for
warm drinks, or to pre-chill by filling with cold water for cold drinks.
• Do not overfill the product. Make sure not to fill the liquid above the groove on the screw thread,
leaving sufficient space in the neck for the insulated cap.
• Make sure to close the insulated cap (b) tightly when transporting the product to avoid any leak
-
age.
Cleaning guidelines
• Always wash your new product before first use.
• Always clean all parts of your product after each use.
• The thermal flask (d) is not dishwasher safe. Handwashing only.
• Wash the product by hand with warm water and dish detergent. Rinse well. Drain and dry
thoroughly before storing.
• For thorough cleaning, remove the gasket (c) from the insulated cap (b). Place the gasket im-
mediately back in place when dry in order not to lose it.
• Do not immerse in water. Avoid extensive contact with boiling water when washing.
• Do not use abrasive cleaning pads or abrasive cleaners (including bleach), as these will scratch
the product.
• Always store the product open when not in use.
Safety guidelines
• Do not use to store or carry carbonated drinks and do not use in carbonated devices.
• Do not stir using metal utensils.
• Do not use to keep milk products warm because of the possibility of bacterial growth.
• This product should be used by children only under the supervision of an adult especially when
the product contains hot contents. Hot liquids can burn or scald the user.
• Keep away from direct heat or heat sources.
• Do not drink directly from the flask because the inside wall can be hot.
• When filled with hot liquid the cup (a) can be hot. Make sure to fill the cup only up to the screw
thread and grab the cup from the top.
• If the drink you pour in the cup (a) is too hot, let it cool down before taking it in hand. This is a
precaution to avoid any burns.
• Heavy impact may reduce the vacuum performance
and will damage the exterior finish.
Warranty
Tupperware® products are manufactured with great precision from the finest quality materials,
approved for use in contact with food.
Tupperware Tupp Buddy is covered by Tupperware warranty against any material or manufacturing
defect that occur when using the product according to directions and in normal household use.
The warranty does not include damage to the product resulting from negligent use or misuse of
the product (i.e. excessive overheating, stains and scratches on the inside and outside, or any
knocks it may have received or if it has been dropped etc.).
The warranty does not cover any damage to the decorative printing on the product, if any.
Please contact your Tupperware consultant for a replacement.
www.tupperwarebrands.com
