Tunturi 18TCFD2000, Руководство пользователя

Страница: 14 / 48

1 4
English
Replacing the battery
When you have troubles pairing the console we recommend to
replace the CR2032 battery in the transmitter housing�
OFF
CR2032 x1
ON
OP
EN
CL
OS
E
Console
The console for this bike is optional and can be purchased as an
additional part, but is not required�
The additional console can be paired via the build in radio
transmitter�
‼ NOTE
• If you do not wish to purchase the additional console we
recommend you to remove the battery from the transmitter
housing�
- The radio transmitter is located under the resistance adjustment
knob�
- The radio transmitter is equipped with a switch to turn the
transmitter in on or off mode�
- The console will automatically receive the transmitter signal when
setting the transmitter in on mode�
Cleaning and maintenance
The equipment does not require special maintenance� The
equipment does not require recalibration when it is assembled, used
and serviced according to the instructions�
⚠ WARNING
• Do not use solvents to clean the equipment�
• Clean the equipment with a soft, absorbent cloth after each use�
• Regularly check that all screws and nuts
are tight�
• If necessary, lubricate the joints�
Defects and malfunctions
Despite continuous quality control, defects and malfunctions caused
by individual parts can occur in the equipment� In most cases, it will
be sufficient to replace the defective part�
- If the equipment does not function properly, immediately contact
the dealer�
- Provide the model number and the serial number of the equipment
to the dealer� State the nature of the problem, conditions of use
and purchase date�
Trouble shooting:
- When the display of LCD is dim, it means the batteries need to be
changed�
- If there is no signal when you pedal, please check if the cable is
well connected�
‼ NOTE
• When stop training for 4 minutes, the main screen will be off�
• If the computer displays abnormally, please re-install the
batteries and try again�
Transport and storage
⚠ WARNING
• Carry and move the equipment with at least two persons�
• Move the equipment and carefully put the equipment down�
Place the equipment on a protective base to prevent damage to
the floor surface�
• Move the equipment carefully over uneven surfaces� Do not
move the equipment upstairs using the wheels, but carry the
equipment by the handlebars�
• Store the equipment in a dry place with as little temperature
variation as possible�
Additional information
Packaging disposal
Government guidelines ask that we reduce the amount of waste
material disposed of in land fill sites� We therefore ask that you
dispose of all packaging waste responsibly at public recycling centres�
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable use from
your fitness trainer� However, a Time will come when your fitness
trainer will come to the end of its useful life� Under ‘European WEEE
Legislation you are responsible for the appropriate disposal of your
fitness trainer to a recognised public collection facility�
Technical data
Parameter Unit of
measurement Value
HR� receiver handgrip contact
5�3 ~ 5�4 Khz��
Bluetooth (BLE)
ANT+ 



Length cm
inch 80�5
31�7
Width cm
inch 59�0
23�2
Height cm
inch 84,5
33�3
Weight kg
lbs 14�5
32�0
Max� user weight kg
lbs 110
240
Battery size 1pcs CR2032