Tunturi 14PTUB2000, Руководство пользователя

Страница: 98 / 102

98
Owner
’s manual
•
PLA
TINUM PRO
Buble Description Qty
1 Main frame 1
2 Console mast 1
3 Handle bar 1
5 Rear stabilizer 1
6 Seat slider 1
7 Sliding seat mount 1
9 Idler wheel Assy. 1
11 Crank axle 1
12 Fixing cover plate 1
13 Chain cover bracket 1
14 Drive belt 1
15 Drive pulley (Ø330) 1
16L Crank arm (LH) 1
16R Crank arm (RH) 1
17 Bearing (6004) 2
18 Bearing (6203) 2
19 Seat 1
20 Induction brake 1
21 Power control board 1
22 Magnet (speed pick-up) 8
23 Sensor w/cable (350mm) 1
24 Handgrip foam 2
25 Handgrip foam 2
26 Handpulse W/Cable Assy. 2
29 Computer cable (1900mm) 1
30 Wire brake coil harness 1
31 DC wire (250mm) 1
34 Console Assy. 1
34~6 Console top cover 1
34~7 Console bottom cover 1
35 Ø35 × 10m/m_Rubber foot 4
36 Chain cover (LH) 1
37 Chain cover (RH) 1
38 Console mast cover 1
39 Seat post cover 1
40 Front stabilizer cover 1
41 Rear stabilizer cover 1
42 Handgrip side cap (upper) 2
43 Handgrip side cap (lower) 2
45 Pedal (LH) 1
46 Pedal (RH) 1
Spare parts list
47 Transportation wheel (Ø54) 2
49 Button head plug 4
50 Hex head bolt (3/8”×2”) 4
51 Hex head bolt (5/16”×58”) 9
52 Tapping screw (5×19) 2
53 Button head socket bolt 2
54 Hex head bolt (14”×3/4”) 8
55 J bolt (M8×170) 1
56 Phillips head screw (M6×15) 3
58 Phillips head screw (M5×12) 10
59 Flat head socket bolt
(3/8”×2”)
4
62 Tapping screw (Ø3×20) 4
65 Tapping screw (Ø3×10) 4
66 C Ring (Ø17) 1
67 C Ring (Ø20) 2
69 Flat washer (1/4”×13×1T) 7
70 Flat washer (3/8”×19×1.5T) 4
71 Flat washer (3/8”×25×2T) 4
72 Flat washer (5/16”×18×1.5T) 9
73 Flat washer (Ø17×23.5×1T) 1
75 Hex blind nut (M5) 6
76 Split washer (Ø14”) 7
77 Nyloc nut (M8×7T) 1
79 Nyloc nut (14”×8T) 4
80 Nyloc nut (516”×6T) 4
82 Nut (38”×7T) 8
83 M10 × 1.25m/m_nut 2
85 Round disk 2
86 Quick release lever 1
93 Phillips head screw driver 1
96 Crank arm end cap 2
97 Phillips head screw (M5×12) 13
99 Curved washer 1
100 Wrench (12/14) 1
102 Flat washer (5/16×16×1.0T) 2
103 Split washer (5/16”×1.5T) 2
104 Power adaptor 1
105 Handle bar cover 1
106 Seat height Adjustment knob 1
106~1 Knob nut (22×M16×M22×37) 1
106~2 Phillips head screw (M4×5L) 2